PAGE 19
SECTION 12:
DRIVE BELT
Shown on the below is the tensioner for the pump belt. Adjusting this will either increase or decrease tension on
the belt. Use a 3/4” wrench to loosen the jam nuts and either tighten for more belt tension or loosen for less belt
tension.
The tension should be adjusted so that there is between 60 and 65 lbs. of tension on the belt and recheck belt
tension after half an hour. This can be checked with a belt tension gauge (Part Number 041-9999-00) as shown
in Fig. 14.
Tensioner
Adjuster
Tensioner
Adjuster
Belt Tension Gauge
Fig. 13
Fig. 14
Summary of Contents for BRG54FX850
Page 1: ...2021 Rogue...
Page 34: ...PAGE 34 2021 Commercial...