background image

FOR YOUR SAFETY:

1. Read all instructions before assembling or operating your grill.

2. Follow all safety instructions, even if you purchased this grill assembled.

3. This guide is intended for the end user. Retain for future reference.

4. This grill is intended for outdoor use only. Do not attempt to use indoors.

5.  This grill is intended for use on stable surfaces. Do not attempt to use it on or in 

recreational vehicles or boats.

6. This grill is intended for LP gas only.

7. Do not store or use flammable vapors or liquids near this appliance.

8. Do not keep any disconnected LP cylinders near this appliance.

DANGER:

If you smell gas:

1. Immediately shut off gas to appliance.

2. Extinguish any open flame.

3. Open lid.

4. If odor continues, stay away from appliance and contact fire department.

SAFETY PRECAUTIONS

1.  Conform with all local and / or national codes for gas product installation, including 

National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation 

Code, CSA B149.1, and / or Propane Storage and Handling Code B149.2.

2.  This grill must be electrically grounded in accordance with local and / or national codes, 

including National Electrical Code, ANSI Z21.58-2007, and / or the Canadian Electrical 

Code, CSA 1.6-2007.

3.  Before each use, check grill, hoses, tanks, and other equipment for abrasions, cracks, 

frays, wear, or cuts. Replace damaged equipment as specified in the parts list before 

using the grill.

4. Before each use, perform a leak test.

Warnings

Summary of Contents for PRO






























Reviews: