Locate the 2 upper uprights (Parts A1 & A2). Place the narrow end of each
upper upright into the lower upright, align holes, and use a screw knob (Part
H) to secure as in diagram 7. Repeat on opposite side. Next, align the holes
on the flat plate of the upper uprights. (You may have to jostle the uprights to
get holes to align.) Place a screw knob through the back hole and secure with
wing nut (Part I) as in diagrams 8 and 9.
Next, locate the carabiner (Part G), the hanging chain (Part F) and the locking
C-hook (Part J). Place the hanging chain onto the carabiner then insert
carabiner through the front hole of the flat plate of the upper upright as in
diagram 10 and 11. Next, place the locking C-hook (Part J) onto the chain as
in diagram 12.
(
Place the hanging ring of your chair (not included) onto the locking C-hook.
Secure the lock of the C-hook so chair is securely fastened.)
Use the 4 ground stakes (Part
K) to firmly secure stand to
ground by placing stake
through the holes on the foot-
pads as shown in the photo.
Diagram 10
Diagram 11
Diagram 12
Diagram 7
Diagram 8
Diagram 9
