IAM-100 and Controller Manual
6209-9000 Rev 2
23
Figure 10. Key External Components of the IAM-100
5.2. IAM Controller
State
Operating Instructions
Power Up
On power up the green LED will flash and will stay on
if there are no faults.
Faults
If there are faults in any sensor on the system the
green LED will go off and the red led will light
indicating the sensor in fault. The output to a master
or upstream panel will activate and show the fault
condition also on that panel.
Summary of Contents for IAM-100
Page 7: ...IAM 100 and Controller Manual 6209 9000 Rev 2 7 Figure 3 Sample Architecture Diagram ...
Page 14: ...IAM 100 and Controller Manual 14 6209 9000 Rev 2 Figure 6 Controller Housing ...
Page 34: ...IAM 100 and Controller Manual 34 6209 9000 Rev 2 ...
Page 35: ...IAM 100 and Controller Manual 6209 9000 Rev 2 35 ...
