Bacharach High Flow Sampler, Instructions Manual

Page: 25 / 64

Hi Flow

Sampler Operation
Instruction 0055-9017 25
2.15.2 View Records
View the records stored in memory on the unit’s LCD screen as follows:
1.
Access the Review Record Screen from the Expanded Main Screen by selecting
Menu > Access Records > View Records . This screen allows the user to view a short
summary of each record stored in memory. If no records are in memory, then the
message “No Records Saved” briefly appears in the message line.
The first two lines in this screen contain the Test ID information as entered per
Section 2.17 Access Test IDs .
Where: x.xx is the recorded leak rate in ether lpm or cfm
yy.y is the percent difference between measurements #1 and #2
2.
Use the ∧∨ keys to scroll through the saved records.
3.
Press ESC three times to return to the Main Screen.
2.15.3 Erase Records
Erase all records from memory as follows:
1.
From the Expanded Main Screen, select Menu > Access Records > Erase Records .
2.
Confirm or cancel the erase process by selecting Yes or No .
3.
Observe the message “Erasing all records” appears at the bottom of the display
during the erase process.