Bacharach High Flow Sampler Page 20 Instructions Manual Download

Page: 20 / 64

Operation

Hi Flow



Sampler

Instruction 0055-9017

2.11 Calibration Menu

Selecting

Calibration

from the Menu System allows the user to either:

1) calibrate the sensors

2) verify calibration

3) view dates on which calibrations were performed

4) view amplifier gain values (in hexadecimal) of each sensor circuit, or

5) erase calibration.

A detailed description of each calibration function is provided in Section

3 Calibration

2.12 Set Flow Units – LPM or CFM

Selecting

Set Flow Units

from the Menu System allows the user to select whether the

flow rate is displayed in either lpm (liters per minute), or cfm (cubic feet per minute).

Select the desired flow rate unit of measure as follows.

From the Main Screen, select

Menu

Set Flow Units

Highlight the desired units of measure and then press the

I/O

↵

key.

Press ESC to return to the Main Screen.

2.13 Menu Mode – Basic or Expanded

Selecting

Menu Mode

from the Menu System allows the user to select whether only the

most basic amount of information is displayed on the Main Screen (Basic Menu mode),

or if all available information is displayed (Expanded Menu mode).

Refer to Section

2.8 Selecting the Basic or Expanded Menu Mode

for detailed

information on how to select the desired menu mode, and learn about what type of

information is displayed in each mode.

2.14 Operating Mode – Automatic or Manual

Note:

The Operating Mode can only be selected if operating in the Expanded Menu

Mode. Refer to Section 2.8.

Selecting

Operating Mode

from the Expanded Menu System allows the user to set the

instrument’s operating mode to either Automatic or Manual.

Summary of Contents for High Flow Sampler

































































Search results

Summary of Contents for High Flow Sampler

Reviews:

Related manuals for High Flow Sampler

Brands by name

Popular brands

Bacharach High Flow Sampler, Instructions Manual

Search results

Summary of Contents for High Flow Sampler

Reviews:

Related manuals for High Flow Sampler

Brands by name

Popular brands