Bacharach HI FLOW Sampler, Instruction, Page: 31 / 72

Hi Flow Sampler Operation
Instruction 0055-9017
27
3.17 Access Test IDs
Note:
Access Test IDs can only be selected if operating in the Expanded
Menu Mode. Refer to Section 3.8.
Saved test records can be identified (e.g., location of test, type of test,
name of operator, etc.) by manually entering up to two lines of text, with
each line containing a maximum of 20 alphanumerical characters. This
information will be associated with all succeeding tests, and will appear
when the test record is either viewed or printed. The chosen Test ID
remains in effect until a new Test ID is selected.
Selecting
Access Test IDs from the Expanded Menu System allows the
user to select a previously entered Test ID, create a new Test ID or edit
an old one, send the Test IDs to a computer, or erase all existing Test
IDs.
3.17.1 Select Test IDs
Select a Test ID as follows:
1.
From the Expanded Main Screen, select Menu > Access Test IDs >
Select Test IDs .
1 1 / 2 2 / 0 4 0 9 : 4 5 : 3 0
S e l e c t T e s t I D s
E d i t T e s t I D s
S e n d T e s t I D s
E r a s e T e s t I D s
[ 0 0 0 4 ] ( A ) S - -
2. Use the

keys to scroll through any previously stored Test IDs until
the desired ID is displayed. In the example below, Test ID 0005 has been
chosen.
Tip:
To quickly scroll through the Test IDs, press and hold down
the

or

key.
1 1 / 2 2 / 0 4 0 9 : 4 5 : 3 0
T e s t L o c a t i o n 1
O p e r a t o r J o h n D o e
[ 0 0 0 5 ] ( A ) S - -