Fyrite INSIGHT
27
Set the Inactivity Timeout Period as follows:
1. Access the Setup Menu per Section 3.7.
2. Select
Inactivity Timeout
.
3. Select the desired timeout period.
4. Save the selection and return to the Setup Menu or
ESC
to cancel.
3.7.16 Post-Purge Period
The analyzer can be setup to purge the sensors following the combustion
test. It can be programmed to purge for None, 5 seconds, 1, 5, or 10 min-
utes.
Set the
Post-Purge Period
as follows:
1. Access the Setup Menu per Section 3.7.
2. Select
Post-Purge Period
.
3. Select the desired time period.
• Press ▲▼ buttons to scroll/highlight options.
• Press
(
ENTER
)
to select
or save.
•
Press
ESC
to go back.
Summary of Contents for Fyrite INSIGHT
Page 54: ...Fyrite INSIGHT 50...