manualshive.com logo in svg

Bacci Twin, Use And Maintenance Instruction Manual, Page: 169 / 202

Share
Download
Bacci Twin Use And Maintenance Instruction Manual Download Page 169

  

 

CHAPTER 6 – 

Maintenance 

Chap. 6  

- 

3

/

32 -

 

6.1  Maintenance 

 

 

 

   

This chapter contains information that is essential to keep the machine in perfect working order. The 
machine is designed to reduce maintenance needs to a minimum.  
In order to avoid malfunctions or inconveniences, please follow the maintenance instructions provided in 
this section. 

 

MAINTENANCE NOTE 

Machine 

maintenance 

information 

 

 

 INFORMATION! 

A machine that is not regularly cleaned may entail risks for the operator's health. Bad 
maintenance causes early wear and increases the probability of failures and 
breakdowns.  
 
Clean the machine regularly with the recommended frequency. 
Follow cleaning procedures. 
 
All interventions must conform to the safety guidelines and safety rules must be 
rigorously complied with for the operator's integrity. 

 

 INFORMATION! 

The concept of maintenance is closely linked with that of functionality. Maintenance stands for the series 
of operations that must be performed for a product to remain effective and functional and meet the aims 
for which it has been designed; product stands for a building, a machine, a system or a road.  The 
maintenance activity comprises a series of operations, such as tests, repairs, replacements of pieces or 
parts of a product etc.

 

 

 INFORMATION!  

Lubrication maintenance operations can either be performed independently by operators, who intervene 
during the work shift when a malfunction, such as low oil level, squeaking etc. arises (autonomous 
maintenance intervention), or maintenance mechanics (planned maintenance intervention). 

 

 INFORMATION!  

Before carrying out any maintenance operation which is not described in this manual, or in case you 
have doubts on the information provided please contact Paolino Bacci S.r.L.. 

 

 INFORMATION!  

•

 

All planned mechanical and electrical maintenance operations must be correctly carried out 
according to the recommended timetable.  

•

 

All use and maintenance operations of the main commercial components of the system, which are 
not mentioned in this manual, are contained in the suppliers' publications. 
 

Summary of Contents for Twin











































































































































































































Reviews:

No comments