Bacci Twin, Use And Maintenance Instruction Manual

Page: 143 / 202

CHAPTER 5 – Controls and use
Chap. 5
- 25
/48 -
STEP ACTION DESCRIPTION
4
Activating the
command
•
If a person is in danger, press the emergency stop pushbutton on any control
panel.
•
The emergency stop is a safety stop and has priority over all other controls; it
is not synchronized with the forward feed of the machined product, which may
therefore become jammed in one or more points in the machine subsequent
to the stop.
5.5.2 Stop and re-start procedure after working stop - STOP
In the event of a sudden machine stop, be it intentional or accidental, correct function re-start depends
on how the machine has been stopped.
Proceed as described following.
STEP ACTION DESCRIPTION
1
Press the
STOP
pushbutton
Before using the machine, all persons involved must be familiar with the
location and use of all the STOP pushbuttons on the machine shown in the
pictures.
2
Re-start
procedure
To re-start the machine after a machine STOP:
•
Remove the cause for the machine stop
•
Press the "Reset" key (9).
3 Start cycle
Press the “Start automatic cycle” pushbutton (10)