7
8
ASSEMBLY
ASSEMBLY
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
6)
• Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 6).
7)
• Insert the Legs into the ends of the front
tube of both the right and left Upper Frame
Assemblies (Fig. 7).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper Frame
Assemblies. Make sure the lock buttons
are engaged before use.
8)
• Insert another Leg into the ends of the
rear tube of both the right and left Upper
Frame Assemblies (Fig. 8).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper Frame
Assemblies. Make sure the lock buttons
are engaged before use.
Fig. 6
Release Handle
Fig. 7
Fig. 8
Hole
Lock Buttons
Lock Buttons
Hole
Fig. 9b
Fig. 9c
Fig. 9d
9)
• Loop the flap on the back of the pad over the top of the Seat Back. Connect
the Seat Pad to the Seat Back with the two Elastic Loops. These fit over the
Attachment Tabs located near the top harness slots (Fig. 9a).
• Attach the bottom of Seat Pad to the Seat Base with the two Elastic
loops located at the rear of the bottom of the Seat Pad. These fit over the
Attachment Tabs located on the Seat Base near where the Seat Back and
Seat Base Join (Fig. 9b).
• Attach each anchor hook of the Seat Pad to the side of the seat armrest
(Fig. 9c). Ensure that the slot of the anchor hook slides through the under
side division (Fig. 9d).
Fig. 9a
