CHANGING THE ROLLER HEADS
• To remove the roller head, push down on the
head and pull the top away from the unit (See Fig
1). Note, this may require some force.
• To insert a different roller head, insert the WHITE
NOTCHED PIN into the handle end first, the top
part can then be inserted through the gap at the
top (See Fig 2).
• Firmly snap the PURPLE ROUND PIN firmly into
place. The callus remover should fit securely
without falling out of the unit (See Fig 3).
• If the body of the Pedi becomes dirty, wipe off with a damp cloth and
mild detergent or soap.
NEVER
use thinners, other solvents or any
harsh cleaners.
• Once dried, carefully place the protective cap on.
Fig 1
Fig 2
Fig 3
IMPORTANT
Do not use on open wounds, cuts, burns, warts or
blisters.
