5
2. Hold the appliance at an angle of
90 degrees to the surface of where
hair is to be removed.
3. Always work with both hands: ca-
refully stretch the skin with one
hand while moving the appliance
with the other. Only move your
hair remover against the direction
of the growth of your hair. Do not
use circular or back-and-forth mo-
tions.
4. Slowly move the hair remover, whi-
le pressing down lightly. Careful
not to press the appliance down
too hard against your skin; it might
slow down and be less effective.
Removing hair from sensitive
areas:
To remove hair from sensitive areas,
we recommend putting the acces-
sory for sensitive areas on the head
of your hair remover. It reduces the
number of hair remover disks so that
you can remove hair more smoothly
and with greater precision.
If your hair is long (longer than 1 cm),
we recommend cutting it with scis-
sors before using your hair remover,
preferably set at speed I.
1. To remove hair from your unde-
rarms, move the appliance using
an upwards motion, then a second
time using a downwards motion.
2. To remove hair from your bikini
line, carefully stretch your skin and
move the appliance working from
the outside in.
C - Moisturising
After hair removal, we recommend
using a moisturising milk to soften
your skin. Apply the milk then mas-
sage it in using circular motions to
help the skin absorb it.
IMPORTANT
• Only use BaByliss Isyliss for hair
removal and following the instruc-
tions in this manual.
• Do not remove hair from areas with
open wounds, cuts, burns, warts,
moles, sunburnt skin or varicose
veins. Do not use if you are suffering
from a skin irritation, skin infections
like psoriasis or eczema on the legs.
• Do not use for removing hair from
your face, head, chest, eyebrows,
eyelashes or genitals. Only use the
Isyliss to remove hair from your legs,
bikini line, arms and underarms.
MAINTENANCE
• Run the little brush between the
disks after each use.
• We recommend you regularly disin
-
fect the heads and accessories with
alcohol. Never immerse the applian-
ce in water.
• For maximum hygiene, the depi
-
lation head can be removed and
easily rinsed under running water.
• If the body of the appliance needs
to be cleaned, use a cloth moiste-
ned with soft detergent
