Lockable Cold Shot
Use the lockable cold shot on warm hair to rapidly cool the hair and set
the style in place for a long-lasting effect. When in use the cold button
will illuminate.
IMPORTANT!
Always ensure the lockable cold shot is in the off position
when using the heat settings. If the cold button has been activated
when using the heat setting to dry the hair, it will over-ride the heat
setting resulting in a cold airflow.
Salon Slim Concentrator Nozzle
Use the concentrator nozzle to direct the airflow as you style.
IMPORTANT!
Only use the concentrator nozzle on the lowest heat /
speed setting.
CLEANING & MAINTENANCE
To keep your appliance in the best possible condition, please follow
the steps below:
General
• Ensure the appliance is switched off, unplugged and cool. To clean
the outside of the appliance, wipe with a damp cloth. Make sure that
no water enters the appliance and it is completely dry before use.
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.
Cleaning the Filter
• Ensure the appliance is switched off, unplugged and cool.
• Holding the handle of the appliance firmly, twist the rear filter to the
left to remove.
• Using a soft brush, clean any hair and other debris from the filter.
• Replace the rear filter by aligning the grooves and turning to the right
until the filter clicks back in to place.
For more information on this appliance visit www.babyliss.co.uk