BaByliss PRO FXBDG1E, Manual

Page: 8 / 84

8
ative ion generator that generates
an exceptional volume of millions
of ions per cm3. Hair is naturally
positively charged; this positive
charge is increased during drying
and generates static electricity,
which causes the scales of the hair
to move away from each other. Hair
is shiny and easy to style. It has
been proven that ionic technology
acts as a catalyst for hair products.
LIGHTWEIGHT AND ERGONOMIC
DESIGN
The FX hair dryer weighs 420 grams
only. Its knurled metal extended
handle ensures ultimate no-slip
grip. Perfectly aligned with the ap-
pliance’s centre of gravity, it is the
guarantee of a balanced, comfort-
able grip.
You will so work without strain in
the forearm and without tiredness.
Its light weight and ideal balance
make it perfect for the salon.
ATTACHMENTS AND
ACCESSORIES
The FX hair dryer hair dryer comes
with 3 different concentrator
nozzles. One straight, narrow 6mm
x 60mm nozzle that is perfect for
straightening because it lets you
achieve the required tension on
the hair.
One ultra-thin 4mm x 70mm nozzle
for optimal, controlled air pressure
and even more efficiency.
6 x 75 mm beveled, large nozzle
for smoother blow-drying; it is
slightly diagonal in shape, hugging
the shape of the brush perfectly. A
comb comes as an attachment to
this nozzle to allow beard drying
and styling. We recommend to
set the dryer on temperature I and
speed I (or speed II if you wish to
lower the temp level even more)
with or without turbo every time
you use it for beard’s care.
The FX hair dryer also comes with
a silencer for always more comfort
in use for your clients and you, as
well as a diffuser for drying curly
and wavy hair without adding
unwanted volume.
New nozzles with fins
Decrease high temperature on the
sides of the nozzle
• The nozzle can be touched with
hands even when the blow dryer
is on
• Reduces the risk to damage
surfaces where the dryer in use
is laid down
Can be used as a pic to better
control the hair strand.
USER MAINTENANCE
The dryer must be kept clean for
proper operating performance.
When cleaning is needed, unplug
the cord, allow to cool and clean
dust and lint from air intake open-
ings with a small brush or the
brush attachment of a vacuum
cleaner. The outer surface of the
dryer should be wiped clean with
a cloth only. Blocked or clogged air
intake vents will cause the dryer to
overheat. If overheating occurs, an
automatic safety device will shut
the dryer or the heat off to prevent
damage or personal injury. If the
unit or the heat cycles off, turn the
dryer off, unplug the cord, and al-
low the dryer to cool for 10 to 15