F R E N C H L I B R A R Y L O W S H E L V I N G
baby&child
RESTORATION HARDWARE
PART LIST
A -
Side Panels
2 Pcs.
D - Shelf Bracket
4 Pcs.
B -
Cross Bracing
1 Pc.
E - Wooden Shelves
4 Pcs.
C -
Angle Support
4 Pcs.
F - Wrench
2 Pcs.
Assemble the shelving unit as close to its final location as possible. Assemble the shelving unit facing down on the
ground. Place the two side panels (A) on the ground, same ends facing one direction, and follow the steps as below :
2
1
1
2
2
1
1
2
2
1
C
A
C
A
B
Step 1 : Remove the pre-installed bolts from the back ends of the Side Panels (A). Place the Angle Supports (C) at both
ends of Side Panels and tighten the bolts back in place.
Step 2 : Remove the pre-installed bolts from back of the Side Panel (A) and place bolts from the back ends of the Cross
Bracing (B) to match the holes, and re-tighten the bolts.
Customer Service - If you are missing parts or have any questions about this product
please contact us at : 1-800-762-1751
IMPORTANT SAFETY INSTRUCTIONS:
For your safety, it is recommended that two people assemble the unit.
These instructions are provided for your safety. It is important that they are read carefully and completely before
installation of the fixture.
Page 1 of 4
