background image

T

E

C

H

N

I

Q

U

E

S

28

Sew to the point in fabric where you want to turn a corner. Stop the machine. Turn the handwheel
toward  you  (counter  clockwise)  by  hand,  making  sure  the  needle  is  going  down  in  the  fabric.
Slowly start to raise the needle OUT OF FABRIC. Stop when you see the eye of the needle. (The
point of the needle will still be in the fabric.) Raise the presser foot (fig A), and slowly pivot the
fabric (fig B). Lower the presser foot and continue to sew (fig C).

Turning Corners - Chain Stitch

A

B

C

Turning Corners - Cover Stitch

Sew to the point in fabric where you want to turn a corner. Stop the machine. Turn the handwheel
toward you (counter clockwise) until the needles are down in the fabric. Turn the handwheel away
from you (clockwise) until the needles are in the highest position and the needles are out of the
fabric. Raise the presser foot (fig A) and slowly pivot the fabric. Align the needles with the stitch-
ing on the fabric (fig B) and lower the presser foot. Continue to sew. (fig C)
To keep the stitch from unraveling at the corner(s), use a hand needle and thread to complete the
corner on the top of the fabric and catch the chain looper thread on the underside.

A

B

C

Summary of Contents for Model BLCS













































Reviews: