O
V
E
R
V
I
E
W
8
1. Remove machine from box
After removing the packing materials from
the box, gently lift your Baby Lock by grasp-
ing the handle provided on the top of the
machine. Place the machine on a sewing
table or any level surface that provides
ample work area to the left. Place the foot
controller in a pedal stay, if desired, and
place it under the sewing table.
2. Plug in the machine
Plug the power cord into the machine first,
then into a wall outlet. The power switch is
located toward the back on the right side of
the machine. Always make sure the power is
off when the machine is not in use (fig. A).
Available foot controller for U.S.A.: Model
YC-482 or YC-420W.
3. Polarized plug
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qual-
ified electrician to install the proper outlet.
Do not modify the plug in any way.
4. Foot controller
The sewing speed of the machine is deter-
mined by the amount of pressure applied to
the foot controller. When not in use, do not
place anything on the foot controller, or the
machine could start inadvertently and the
controller or motor could burn out.
Setting Up Your Baby Lock
A
