SEWING
Se
wi
n
g Ba
sics
43
2
Changing Sewing Direction
Stop the machine with the needle in the fabric at the
point where you want to change the sewing direction,
and then raise the presser foot lever. Using the needle
as a pivot, turn the fabric, lower the presser foot lever,
and then continue sewing.
The pivot setting is useful when changing the sewing
direction. When the machine is stopped at the corner of
the fabric, the machine stops with the needle in the
fabric and the presser foot is automatically raised so the
fabric can easily be rotated (see “Pivoting” on page 47).
■
Sewing a Seam Allowance of 0.5 cm or Less
Baste the corner before sewing, and then, after
changing the sewing direction at the corner, pull the
basting thread toward the back while sewing.
a
0.5 cm
Sewing Heavyweight Fabric
■
If the Fabric Does Not Fit under the Presser
Foot
The presser foot lever can be raised to two different
positions. If the fabric is too thick to fit under the
presser foot, raise the presser foot lever to its highest
position so that the fabric can be placed under the
presser foot.
■
If the Fabric Does Not Feed
If the fabric does not feed when starting to sew or
when sewing thick seams, press the black button on
the left side of presser foot “J”.
a
Raise the presser foot lever.
b
While keeping the black button on the left
side of presser foot “J” pressed in, lower the
presser foot lever.
* The presser foot remains level, enabling the fabric to be
fed. Once the trouble spot has been sewn, the presser foot
will return to its normal operation.
Sewing Lightweight Fabric
Iron the fabric with starch or place thin paper or tear
away stabilizer under thin fabrics to make sewing
easier. Gently tear off the paper or the stabilizer after
sewing.
a
Thin paper
a
CAUTION
• Do not forcefully push fabrics more than
6 mm (approx. 1/4 inch) thick through the sewing
machine. This may cause the needle to break and
cause injury.
Memo
When “AUTOMATIC FABRIC SENSOR SYSTEM”
(Automatic Presser Foot Pressure) in the machine
settings screen is set to “ON”, the thickness of the
fabric is automatically detected by the internal sensor
so the fabric can be fed smoothly for best sewing
results. (See page 48 for details.)
a
Summary of Contents for espire BLSR
