Regalia Stationary User Manual | 21
QUILTING TIP
: A size 16/100 needle will accommodate most threads and fabrics.
Heavier threads, such as top stitch and some decorative threads, require a larger
needle such as 18/110 or 21/130. Lofty batts and heavier fabrics such as denim,
canvas, or densely woven fabric may also require a larger needle.
Hopping Feet
The Regalia ST comes with two hopping feet: a closed-toe foot (installed) and an
open-toe foot. Use the closed-toe foot for everyday quilting and the open-toe foot for
greater visibility when stitching (for example, micro quilting).
To change the hopping foot
1. Remove the foot on the mount using
the 2.5mm hex wrench to loosen the
mounting screw far enough to slide the
foot off the mount.
2. Slide the desired foot onto the mount.
The opening on the side of the foot will
line up with the screw insert. Push the
foot up as far as it will go.
3. Tighten the foot the 2.5mm hex wrench.
