16 | www.BabyLock.com
Machine Head USB Port (included)
To be used to power accessories, NOT for programming, which is done through the
USB port on the front display.
Horizontal Spool Pin (optional accessory, part #BLJ18-HS)
For certain thread types, it's recommended that you use a horizontal spool pin for
better tension results.
Installing the Color Touchscreen
The Regalia ST comes with a touchscreen front display.
To install the front display
1. For the front display, locate the four 4-40 screws and a small Phillips
screwdriver (not provided). You’ll also need the display with the hinges
attached to the bottom row of connectors on the back of the display.
2. Insert the 4-40 screws into the
openings on the display’s metal
hinge. Align the screws in the
hinge with the holes on the display
bracket. Use the small Phillips
screwdriver to fully tighten the
screws.
