BC-2200
BC-2210
BC-2230
SHORT INSTRUCTIONS FOR USE
This is the brief instructions for use of the device. You can find the detailed, extended guide on the
www.babycontroldigital.eu website. You can also download the Manufacturer's Declaration of
Conformity from here.
Dear Carer,
Thank you for purchasing the Baby Control breathing monitor. You have taken the right step towards
ensuring the safe and undisturbed sleep for your baby and hopefully for you as well! The Baby Control
continuously monitors your baby’s breathing movement rate whilst your baby is in his cot, crib or pram.
We hope that you will be completely satisfied with your Baby Control breathing monitor.
Your Baby Control Team
1. The Baby Control continuously monitors the breathing of a baby sleeping in his cot, crib or pram.
2. The sensor pad is placed directly on to the base of the cot under the mattress and senses the baby’s
breathing movements. Information is then passed to the control unit to evaluate the measured values.
3. The Baby Control breathing monitor continuously detects breathing movements, if it is unable to detect
breathing for twelve seconds it triggers an audible alarm. The detection sensitivity threshold can be
adjusted (see “Adjusting the detection sensitivity threshold”)
4. The Baby Control is not able to intervene when it is unable to detect breathing movements but it is
designed to alert you to a possible serious situation. Only a person who has undergone a dedicated training
course is able to give artificial respiration and perform resuscitation.
Please ask your doctor for advice.
Please regularly check the functionality of your Baby Control breathing monitor. Please contact your
distributor if your device does not appear to be functioning properly.
The Baby Control breathing monitor can save a life, but it is not a life-saving device.
Key:
1 – ON/OFF button
2 – Numerical display
3 – Two piezo speakers
4 – Red indicator light
5 – Battery compartment
6 – Green indicator light
7 – Sockets to connect sensor pads
8 – Sensor pads wrapped in plastic
9 – T-connection
Introduction
Control and display units of Baby Control breathing monitor
