Adjust the drip tray so the bottle is as close to the Funnel outlet as possible.
This will make sure no formula spills outside of the bottle.
Lift up and pull out to remove.
Push in and
down
to install.
Tall Bottle
Short Bottle
Bottle Preparation Continued
After baby stops feeding from bottle, discard any leftover formula mixture.
Never remove Water Tank, Funnel or Powder Container while machine is in operation.
Always hold the bottle when feeding baby. Never prop the bottle up and leave your baby to feed unsupervised.
Bottle Preparation continued on next page
Pour powder loosely and evenly into Powder Container. Never fill past the MAX line.
Never pack powder in the Powder Container or overfill.
Powder can be spread evenly with the 3 arms on the Powder Container Lid before closing.
5
6
Check for clumps and shake
or stir the bottle if necessary.
Test temperature...
1
2
Fill water to MAX line
Fill powder container with powder
and close Lid
3
The heater in the Water Tank will warm the water and keep it warm as
long as the machine is powered on.
If you refill the Water Tank with cool or room temperature water and
need to use the machine right away, the machine can be used while
water is heating (flashing yellow light).
If you run the machine with cool or room temperature water, before
the water is warm and ready, always make sure formula is mixed
properly and check for clumps.
About water temperature
Flashing Yellow means
water is heating.
Solid Green means
water is warm
and ready.
Temperature Indicator Lights
Flashing Yellow & Green
means water poured into
tank is too hot or too cold.
Never fill Water Tank with hot water. If you boil water before using it
in the machine, let the water cool to body or room temperature before
pouring it into the Water Tank.
For quickest warming time, always fill the water tank with room
temperature or cool water. Flashing green & yellow lights mean the
water poured into in the Water Tank is too hot or too cold.
The machine will not work while the green & yellow lights flash.
If you don’t want to wait long for the water to heat, do not fill with
water stored in the refrigerator.
Select correct height for Drip
Tray based on bottle height.
Machine will dispense formula
into bottle and stop when done.
Select bottle size by pressing the ounce button.
With each push, the amount will increase 2 ounces.
When desired ounce size is selected, press start
to dispense formula.
4
5
6
7
8
Check level of mixed formula.
Bottle Preparation
due to
added powder volume and/or
variance in bottle markings.
Level will appear higher
Follow the steps on these pages to prepare bottles with the Formula Pro®
...
and feed baby.