28
29
14.The safety seat’s rigid and plastic elements should be positioned and
installed so that they cannot be trapped by a moving seat or a door
during everyday use of the vehicle.
15. Do not disassemble, modify, or add any piece to the child seat or
harness, as this would seriously affect its basic functioning and the
safety that the child seat provides.
16. The safety seat must remain installed in the vehicle with the safety belt,
even if the child is not seated in the child seat. The child must never be
left unattended while seated in the safety seat, not even outside the
vehicle.
17. Keep the safety seat away from corrosive products.
18. Do not use anchor points that are not listed in the instruction manual
and indicated on the seat.
19. The seat should be replaced after undergoing the violent stresses
associated with an accident.
20. The manufacturer guarantees the quality of its products, but not
the quality of second-hand products or products belonging to other
companies.
21. instruction illustrations are for informational purposes only. The child
restraint system may contain small differences compared to the
photographs or images in the instruction manual. These variations do
not affect its certification under ECE Regulation R44/04.
22. Ensure that any strap or belt that holds the child is not bent or twisted
and keeps tightened. Act under the same criteria with the vehicle belts
that serve as a restraint for the chair.
A. Headrest.
B. Seat cover.
c. Harness shoulder straps.
d. Harness shoulder protectors.
e. Harness buckle.
f. Abdominal belt guide group
0+/1.
G. Recline lever.
H. Harness adjuster strap.
I. Harness adjuster button.
J. Reducer cushion.
K. Diagonal belt guide group 0+/1
l. Shoulder straps height
adjusment slots.
M. installation slot (group 1).
N. metal harness connector.
o. Diagonal and abdominal belt
guide group 1/2/3.
P. Diagonal belt guide group 2/3.
Q.
Recline adapter.
1. oVerVIeW
3. INsTAllING cHIld seAT reArWArd fAcING. GrouP 0+.
GROUP 0+/1. From 0 to 4 years approx. (0 - 18 kg).
NoTIce
notice:
we advise to use the seat backward facing to the travel direction
as long as possible.
if the size of the vehicle does not allow safe installation of the seat backward
facing or size of the child exceeds the height percentiles and this causes
the child to be incorrectly positioned in the seat, we advise rearward facing
installation until the child reaches 13 kg of weight.
if necessary, the child can travel on the car seat installed forward-facing only
if the weight of the child reaches 9 kg.
A correctly adjusted headrest ensures optimal protection for the child in the
safety seat. The headrest should be adjusted so that the shoulder straps are at
the same height as the child’s shoulders (fig. 3.1).
WHere:
in the vehicle rear seats.
1
2
HoW:
GRoUP 0+/1 install rearward facing.
3-point belt (vehicle´s seat belt)
GRoUP 1/2/3 install forward facing.
3-point belt (vehicle´s seat belt)
Notice:
The child seat must only be used in this seat iF it has a lap and
diagonal belt (3 points).
Please, do noT install the safety seat in forward seats except
for the following cases:
1. whenever the vehicle does not count with rear seats.
2. when all rear seats are already occupied by children
exceeding 135 cm height.
3. when it is not possible to install all child restraints systems in
the rear seats.
2. uses IN THe VeHIcle
*note: According to Spanish legislation for child restraint systems (Royal Decree 667/2015).
