“The
world
at your feet,
and your
kids
right in front of you”
EN | Rain Tent Babboe City - Manual for mounting
Congratulations on your new rain tent for your Babboe City cargo bike! Below you will
find the instruction manual for the rain tent. To dismount the tent, follow the steps
in the reverse order.
Step 1
Attaching the side bars to the box
Use the provided sidebars to attach the tent properly.
Unscrew the central nuts and bolts at the sides of the
box. Attach the sidebars with these nuts and bolts,
leaving the shims out.
Step 2
Mounting the poles to the box
Mounting the poles to the carrier is simple, however, it
should happen in the following order:
1. First, place the poles on the side of the handlebar
(green sticker BACK) into the slots on the side of the
handlebar up to wider section of the poles.
2. Then insert the central extension in the poles on
the side of the handlebar
3. Place the poles for the front (red sticker FRONT) in
the central extension
4. Place the poles for the front side into the slots.
This creates the necessary tension on the poles,
ensuring a secure structure
Step 3
Attaching the canvas
The order of assembly is essential for an optimum fit:
1. Unfold the tent and unzip all the zips of the windows
2. Place the canvas over the poles: the broad side on the sides and the narrow side with
the clips (for the handlebar) at the side of the handlebar
3. Pull the canvas downwards. Make sure the poles are correctly inserted in the sleeves
of the canvas
4. Close the zips on the front side first and then the zips on the side of the handlebar
TIP:
A sunroof is also available for use in combination with the poles of the rain tent.
EN
5. Feed the ends of the tie down straps through the corners
(start at the top) and tighten slightly (A)
6. Is the tent in place? Tighten all tie down straps so the tent
is secure
Step 4
Opening the windows
Cycling with the windows open? Fold the windows carefully and attach to the hook on the
top of the rain tent using the elastic band.
A
