BAB TECHNOLOGIE KNXEASY, Documentation, Page: 40 / 44

Documentation KNXEASY
40 b.a.b-technologie gmbh KNXEASY version. 1
{"responses":[{"type": "ack","command": "twisted_pair 0 read scene1 dpt-1-10"},{"type":
"read","command": "knxeasy 0 read scene1 dpt-1-10 start start/stop"}]}
The application POSTMAN from Google Chrome gives you the possibility to send HTTP requests:
Figure 45: POSTMAN GET
You can also send requests directly from the Client simulation just like you do with the other protocols,
with the send button.
GET FILES
If you need it in your own application, you can get via a HTTP GET request different files containing many
information in a JSON format, especially information from the ETS 4 project. Addresses are:
http://[IP address]/knxeasy/rest/knxeasy/[path]
- Group Addresses: path is “groupaddresses”. Contains every information about group addresses you
configured in your ETS 4 project.
- Topology: path is “topology”. Contains every information of your KNX topology configured in your
ETS 4 project.
- Datatypes: path is “datatypes”. Contains the entire list of Datapoint types available in the KNX
protocol, and many information about each of them.
Saved command: path is “commands”. Contains the list of every saved command (see next chapiter: "
- Saved command").
You can also send these HTTP GET requests from the Client simulation. As soon as you choose HTTP
protocol, an extra menu appears. Choose the file you want to get from the GET select menu and press on
the GET button. The file content appears in the log area.