BAB TECHNOLOGIE APPMODULE IP, Documentation, Page: 59 / 62

APP MODULE Documentation
BAB TECHNOLOGIE GmbH 59

Select the firmware image file (*.bin extension) using the “Select update file” dialogue. Update
type and version are displayed.

Please choose one of the update options
1.
Keep Configuration:
All settings, apps and instances will be preserved
2.
Keep Network Settings:
Only the network settings will be preserved.
Caution: all other settings as well as all your apps and their instances will be deleted
3.
Reset Configuration:
The device will be reset to factory defaults during the update.
Figure 58: Keep network settings
Note: If the “Keep network settings” checkbox is not selected, the APP MODULE can be accessed at the
default IP address after the update.
(For factory settings, see “
Initial Operation
”)

Launch the update by clicking on “Perform Update”.
Figure 59: Perform update

Wait until the update is complete. The Web interface is updated automatically once the process
has been successfully completed.
 The update restores the device factory settings (except for the network settings; see above).
Individual settings are only loaded again when you restore a backup (see “
Backup the
settings ”).