APP
MODULE Documentation
BAB TECHNOLOGIE GmbH 31
EnOcean Profiles (EEP)
The EnOcean profiles (EnOcean Equipment Profile - EEP) define the device category, the function and
the device specification. During the
APP
MODULE configuration, the KNX parameters automatically
adapt to the selected profile. The profile consists of 3 number pairs separated by a hyphen: XX-XX-XX
The different positions represent the following:
ORG-FUNC-TYPE
ORG determines which messages form the communication base (see also 'Device
categories/sensors').
FUNC determines which device is involved, that is e.g. a switch or a temperature sensor.
TYPE determines the exact specifications of the device functionality.
Transmitter ID (Trans. ID)
Is a definite device address which only exists once. This address allows the sending device to be
identified.
Teaching Telegram / LRN Telegram
Is a special telegram used to "teach" the sensor to recognize the actuator, that is, to adapt the actuator
to the sensor. It is important for the actuator to know from which hardware address it gets its sensor
data. There are several kinds of adapting mechanisms. Please consider the respective descriptions.
5.3.2
ENOCEAN CONFIGURATION
The
APP
MODULE internally works with the KNX group address system. In order to continue to use
received EnOcean signals within the device or to trigger EnOcean telegrams, KNX group addresses must
be used. You will find information about this in chapter
".
In order to access the corresponding
APP
MODULE configuration mask, please consider the
chapter"
"). The window generally consists of three areas:
Figure 26: EnOcean Configuration - Devices