APP
MODULE Documentation
BAB TECHNOLOGIE GmbH 21
Select “Extension” under “Select IP Interface”. This enables the “Extension interface” section.
Target host:
For “Target host”, enter the address of the required EIB
PORT
(e.g.
192.168.1.222).
BMX UDP port:
In the standard scenario, the facility coupling in EIB
PORT is set to
BMX port
1735 (you can check this in EIB
PORT under “
System” – “Configuration” – “Advanced EIB
(yabus) settings” – “BMX UDP port”).
Group address format:
Not relevant here. Enter “3 Level (xx/y/zzz)”.
This sets up communication from the
APP
MODULE to EIB
PORT
. Communication from EIB
PORT to the
APP
MODULE must be set up at the EIB
PORT end
.
SETTING UP THE CONNECTION IN EIBPORT
To set up the connection in EIB
PORT,
you will need the EIB
PORT
“Facility coupling” job. For detailed
information on the job, please see the EIB
PORT
documentation.
In EIB
PORT,
open the
“Job editor” (“Editor” – “Window” – “Job editor”) and add a new “Facility
coupling” job.
Figure 17: EIBPORT facility coupling job