APP
MODULE Documentation
12 BAB TECHNOLOGIE GmbH
2.2
INITIAL OPERATION
If the
APP
MODULE has been mounted and started as described in chapter "Assembly", commissioning
can now be continued as specified below.
Factory setting on delivery:
IP address
192.168.1.224
Subnet mask
255.255.255.0
Username
Admin
Password
Admin
Device Name
AppModule
Note: The password must be changed immediately when logging in for the first time. If the password is
lost, the device cannot be reset!
2.2.1
LANGUAGE
Web interface
The language used for the
APP
MODULE Web interface is based on the language set in the browser.
German and English are currently available in the
APP
MODULE. If the browser is set to a language other
than German or English, English is displayed in the
APP
MODULE interface.
Java application (EnOcean Editor)
The language in the “EnOcean Editor” Java-based application adjusts to the language set in the browser
after start-up from the browser. If the app is used in BAB STARTER, the language set in the operation
system applies. English is used if a language other than German or English is set.
2.2.2
SYSTEM REQUIREMENTS
Current browser (e.g. Firefox, Chrome, Safari, etc.)
Do not use Internet Explorer
If applicable, an app from the APPMARKET (
https://www.bab-appmarket.de/de/
For EnOcean configuration: BAB STARTER or current JVM & JVM browser plugin
2.2.3
ESTABLISHING CONNECTIONS
In order to configure the
APP
MODULE, a current browser and a network connection to the device are
required. If the device is in the condition of delivery, it can be accessed at the above-mentioned IP
address and the network settings must be adjusted to the address range, where necessary. Please follow
the information given in the chapter "
Adjusting the network settings of your computer
" for this
purpose.