Cod.81320556
55
3
Click on the Unlock button
4
If the code is OK, a “Key valid!”
message is shown.
Click on the OK button to complete
the procedure.
NOTE:
if the code is wrong, an error
message is shown. Press the OK
button to edit the code again
5
Some messages are displayed in a
DOS window during the Unlock
process.
NOTE:
don't touch the screen while
the process is running
NOTE:
the
system
will
be
automatically rebooted at the end of
the procedure
3.3.5.4
Test Hardware
This a tool used for test all the hardware parts installed on the
Skynet. The Test is structured in two parts:
•
main board, through the relative button you can choose the hardware present on the main
board to test
•
optional cards, if there is an optional card installed the test button is available
