B.Pro TS-H1, Translation Of The Original Operating Instructions

Page: 11 / 52

11
Mobile Plate Dispenser OPERATING INSTRUCTIONS
Commissioning after storage
When the unit is brought from a cold storage room into a kitchen, moisture contained in the
room air condenses on the surface and inside of the unit. When the unit is connected to the
mains, there is a danger of the moisture film causing a short-circuit or an electric shock.
Do not operate the unit until it has reached room temperature.
Mains connection
The mains voltage and frequency specified on the rating plate must match the corresponding
values for the mains socket outlet.
The unit must not be used if the insulation on the mains cable or the mains plug is damaged.
The mains plug is only to be plugged in or unplugged when the unit is switched off. Otherwise,
the unit's electrical system and the mains socket outlet may become damaged.
Only unplug by pulling on the mains plug housing.
General Information
The user must be aware of the hazards that the unit presents and be able to assess them.
The unit may only be used by persons whose physical, sensory or mental abilities are not sub-
ject to any restrictions relevant to operating the unit.
The unit may only be used when it is in proper working order.
If there is damage, secure the unit against accidental use and have repairs carried out immedia-
tely by one of the authorised service points listed under Repairs.
Warning signs
The following warning signs are mounted to the unit:
Warning sign Meaning – Mounting position
"Warning: hot surface" in compliance with DIN 4844-2
Replace any illegible, damaged or missing warning signs immediately.
Distribution height of stacked items
The distribution height of stacked items set during commissioning may need to be adjusted. If
the stacking platform is set too high, the stacked items may tip over.
Operation