B.Pro SW 6X4, Translation Of The Original Operating Instructions

Page: 48 / 130

12
SERVING/CLEARING TROLLEY OPERATING INSTRUCTIONS
en
Cleaning frequency
Clean the trolley after each use.
Model with cutting board
Clean the cutting board thoroughly after each use. Clean the entire surface with commercially
available dish-washing detergent. Then rinse off under running clean water. Rub dry with a clean
cloth. Also clean the work surface or the worktop beneath thoroughly and rub dry with a clean
cloth to minimise the risk of slipping.
If the cutting board surface is not cleaned thoroughly after each use, there is a risk of germs
spreading. Foodstuffs will become inedible as a result and must not be offered for consumption
under any circumstances.
You must dispose of contaminated foodstuffs as described in DGUV regulation 110-003 on
working in kitchens and any applicable regional or country-specific regulations.
B.PRO recommends
Rubbing wooden cutting boards with commercially available cooking oil at regular intervals.
Cleaning methods
Use approved cleaning methods only. Do not use steam jet units, high-pressure cleaners, water
sprayers or similar cleaning devices.
General information on cleaning agents
Do not use metal parts for cleaning. Metal parts can damage the trolley and/or cause corrosion.
Do not use pointed or sharp objects for cleaning. They can damage the trolley.
Do not use scouring agents. Scouring agents scratch surfaces.
Cleaning agents for synthetic parts
Do not use scouring agents. Scouring agents scratch surfaces.
Do not use the following cleaning agents or cleaning agents containing the following substances
(material damage!):
• Ethyl alcohol, isopropyl alcohol and higher alcohols
• Acetone
• Benzene
• Turpentine
• Acetic ester
Castor brakes
Check that castor brakes work effectively on a regular basis.
If brakes do not lock effectively, have the defective castor(s) replaced immediately by one of the
service points listed under Repairs.
Maintenance