B.M.P. ThermicRoll, Installation Manual, Page: 22 / 38

Installation Instructions
JAMISON DOOR COMPANY 22
H4494002 REV B
13.
CONTROL CARD TERMINAL FUNCTIONS
Terminal Function
1 12VDC+ 500mA max
2 DC neutral
3 LED Countdown timer
4
Door closed signal output, closed when door is closed, open when
door is not closed
5
6 Same as 1
7 Safety sensor NC contact with delay (unroll sensor)
8 Open only input, NO
9 Safety sensor instantaneous NC contact (reversing edge)
10 Not used
11 Open/Close input, NO (push button, pull cord, etc.)
12 Pedestrian open input NO
13 Same as 1
14 Photocell input, NC
15 Same as 1
16 Stop button input, NC
17
Encoder signal
18
19 Open over travel switch NO
20 Close only input NO (Future option)
21 24VAC 700mA source for accessories
22 24VAC neutral
23
Three phase power to motor, change rotation by changing wires on
this connector.
24
25
R
Three phase power to control card S
T
PE Three phase PE ground
29 Flashing light output, 230VDC/460VDC
30 DC neutral for 29 and 31
31 Motor brake power, 105VDC
32
Door open signal output, closed when door is open, open when
door is not open
33