General Information
16
Item
Description
1
Status Bar
Indicates the measurement acquisition status of the unit. In Pulse mode, the sample rate and
number of sweeps per second are also shown. In Statistical mode, it indicates the gating set-
ting in use, run time, and number of points.
2
Parameters
Displays a table of measurements for each channel that is enabled on the meter. In Pulse and
Continuous mode, measurements indicated are for power levels at each marker and the aver-
age power between the markers. For Statistical mode, the measurements are Average power,
Maximum power, and Peak-to-Average Ratio or Crest Factor.
3
Channel Status
This area indicates which channels are ON and their individual scale and vertical center.
The base RFM3000 model only permits two sensors to be
active at any one time. With the RFM300-4CH
option, four sensors can be active at any one time.
4
Main Display
This area will show a plot when in Graph Display mode or a table of parameters when in Text
Display mode for the measurement mode selected.
5
Menu Bar
Select
to show and
to hide the on-screen menus.
6
Menu Parth
Used to navigate the menu structure. Shows the menu that will be displayed when selected.
7
Current
Menu/Home
Displays the name of the current menu and provides a home shortcut to the top-level Main
menu. When in the Main or top level menu, this field is not available.
8
Horizontal Scale For Pulse and Continuous mode, indicates the time per division for the waveform display. In
Statistical mode, the horizontal scale for the CCDF graph is in dBr (dB relative).
9
Measure Mode Indicates and allows selection of the current Measurement mode. Modes available are Contin-
uous, Pulse, and Statistical.
10
Display Mode
Indicates and allows selection of the current Display mode in use. Modes available are Graph
and Text.
The Graph Display mode for Continuous Measure mode
will be a flat trace. It is best to use Text Display mode
for continuous signal measurements.
Table 1.3
Display
Summary of Contents for RFM3000 Series
Page 1: ......