B-K Medical Pro Focus 2202 User Manual Download Page 319

Page: 319 / 356

319

Peak systolic velocity.

PSA

Prostate-specific antigen.

PSAD

PSA density: PSA divided by prostate volume.

pulse repetition frequency

The rate at which pulses of ultrasound waves are transmitted
and received in PW (pulsed-wave) Doppler scanning. See
“Adjusting the Thermal Index Limit” on page 153.

PW Doppler

Pulsed wave Doppler. A type of (spectral) Doppler scanning.
See “Adjusting the Thermal Index Limit” on page 153.

RCCA

Right common carotid artery.

RECA

Right external carotid artery.

Resistance Index (see page 256).

RICA

Right internal carotid artery.

ROI

Region of interest.

spectral Doppler

See Doppler mode.

Start systole. See page 253.

standby switch

The switch on the front of the scanner body used for turning
the scanner on and off each day.

TAM

Time Average Mean (see page 254).

TBL

Tibia length.

TEH

True echo harmonics. B-K Medical’s trademarked term for its
tissue harmonic imaging system.

TGC

Time gain control.

THAP

Thorax anteroposterior diameter.

Thermal index. The estimated rise in tissue temperature (in

C) caused by the power emitted by the transducer.

TIB

Thermal index in bone at focal point.

TIC

Thermal index, cranial – bone at surface.

TIS

Thermal index in soft tissue.

trackball keys

The 2

[

]

keys and the

[

+/-

]

key. See “The Trackball and

Trackball Keys” on page 53.

triplex

Simultaneous scanning in 3 modes. See combination mode.

Term

Explanation

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands

B-K Medical Pro Focus 2202, User Manual

Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands