B-K Medical Pro Focus 2202 User Manual Download Page 204

Page: 204 / 356

204 Chapter 14

Ethylene Oxide Gas (ETO)

After the PCU has been cleaned as described on page 202, it can be processed using
ethylene oxide gas.

Caution: The watertight PCU plug cover MUST NOT be screwed on while the PCU is
processed with ethylene oxide.

Summary of Disinfection/Sterilization Methods

Table 14-1. Methods of disinfection/sterilization for the PCU.

Transducers and Puncture Attachments

Please refer to the General Transducer Information (BB0555) manual for
instructions for disinfecting transducers and puncture attachments.

3D Accessories

Endocavity Rotational Mover UA0550

After you use the Endocavity Rotational Mover (ECRM), wipe away any residual
ultrasound gel with a clean, damp cloth.

You can use a suitable disinfectant to clean the ECRM further.

Do not

immerse or

autoclave

Pullback Mover UA0552

Please refer to the pullback mover operations manual for instructions for disinfecting
the Pullback Mover.

WARNING When using ethylene oxide, always follow the manufacturer’s directions
for use and the instructions regarding personal protection.

Disinfection Method

Watertight Plug Cover On/Off

Immersion

STERIS

STERRAD

Off

ETO

Off

WARNING If there are any pits or cracks on the surface of the PCU, processing may
not give a sterile product.

WARNING Do not immerse the ECRM in any liquid. Do not autoclave the ECRM.

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Search results

Summary of Contents for Pro Focus 2202

Reviews:

B-K Medical Pro Focus 2202, User Manual, Page: 204 / 356

Search results

Summary of Contents for Pro Focus 2202

Reviews: