B-K Medical Pro Focus 2202, User Manual

Page: 174 / 356

174 Chapter 13
Clip Storage and Cine Options
Table 13-1. Settings in the Clip Storage Setup window.
3D Setup
You can specify whether the 3D system prompts you before deleting or overwriting
user views and presets. You do this in the 3D Setup window.
To open the 3D Setup window:
1
Click Setup under Image on the right side of the screen to open the various
setup windows.
2 Click the System tab, and then, in the new window that appears, the 3D tab.
The 3D Setup window opens.
Clip frame rate Sets the frame rate (from 5–15Hz) that clips are captured with.
Click
Apply
after you type a frame rate in the field.
Clip length Sets the length of clips that are stored (in seconds). The
maximum possible length depends on the frame rate you have
set. Click
Apply
after you type a clip length in the field.
Capture while not scanning Check this if you want to be able to capture clips while the
image is frozen.
Clear buffer on freeze Check this to have the clip buffer cleared when you freeze the
image.
Clear buffer on start contrast
timer Check this if you want the clip buffer to be cleared when you
start the timer.
Restore Factory Defaults Restores factory default clip storage settings.
Export Codec Exports the Clip Storage codec to a CD or USB device.
Activate on Freeze Check this to have the Cine function start when you freeze the
image.