background image

2000

1200

600

200

40

C

N

L'

L

N

L'

L

N

L'

L

70

98

21

44

98

3.Puttingintooperation/Settings

Factory settings

The PD4-M-GH is presetted with time setting 5 min. and twilight switch 

1000 Lux. 

Attention:

No settings on the unit are possible with potentiometers. Modifications are 

only available by remote control IR-PD4-GH.

Installation and Operating Instruction for B.E.G. - Occupancy detectors PD4-M-GH-SM

2a.InstallationoftheLUXOMAT

®

PD4-M-GH-SM

Unlocking device

Lock device

4.Settingscarriedoutusingremotecontrol(optional)

Remote control LUXOMAT

®

 IR-PD4-GH

1. Check Battery:

  

open battery compartment by pressing the plastic 

springs together and removing the battery-holder.

Caution:

  

Settings with remote control supersede the settings 

by courtesy of potentiometers.

1.Mountingpreparations

Work on the 230 V mains supply 

may only be carried out by quali-

fied professionals or by instructed 

persons under the direction and 

supervision of qualified skilled 

electrical personnel in accordance 

with electrotechnical regulations.

 

Disconnect supply before installing! 

 

When in Master/Slave mode of 

operation, the Master-appliance  

must always be installed at the  

location where there is least  

daylight.

Luminance set point

Sun button - preselected light 

daylight operation

Automatic reading in the current light value  

as new luminance set point

Individual light value 10 - 2000 Lux

Follow-up time (relay and Channel 1) 

15 sec. upto 30 min.

Impulse function (relay and Channel 1)

1 sec. ON, 9 sec. OFF

Change between operation modes fully automatic/  

semi automatic mode => (see page 2, point 6) 

Semi automatic: green LED,  

Fully automatic: red LED on for ca. 3 sec.

Determination of the switch on threshold 

to attain a calculatory target value 

Resetting when open

All values which have been programmed using the 

remote control IR-PD4-GH are deleted, and those values 

which have been set by potentiometer are activated.

Lock device

Test mode 

Reset to deactivate

Resetting when closed

The lighting relay is switched off, i.e.  

opened and the follow-up times reset.

Light on/off

The light will remain switched on/off for as long as move-

ments are detected in the areas of coverage. Once the last 

movement has been detected, the light will remain on for 

the duration of the follow-up time as per setting.  

The appliance will then return independently to the mode 

selected (Fully or Semi-automatic).

Option:

Wall bracket for remote control  

IR-PD4-GH

The product enters an initial 60-second 

self-test cycle, when the supply is first 

connected. The occupancy detector is 

ready for operation.

2c.Selftestcycle

IR-PD4-GH

IR-PD-Mini

B.E.G.

LUXOMAT

®

PD4-M-GH-SM

The detector must be installed on a solid and  

level surface. The circular cover ring must be removed 

prior to assembly. To do this, twist the lens (C) anti-

clockwise through approximately 5° and lift off. 

Having connected up the wires in accordance with 

regulations, secure the detector with 2 screws.  

After installation replace the lens and lock (turn clock-

wise). Mains to be connected

.

ATTENTION:

 Install the unit in such a manner that 

both markings on the housing are positioned in the 

longitudinal axis of the area to be monitored (e.g. 

high-bay corridors)

5. PD4-M-GH-SM - Dimensions

with jumper 

=  switched live (L‘)

without jumper  =  potentialfree

2b.Rangeindependencefromthemountingheight

Mounting 

height

Range (circular detection) T=17°C

walking across

2.00 m

r=7.50 m

Ø=15.00 m

2.50 m

r=9.00 m

Ø=18.00 m

3.00 m

r=11.00 m

Ø=22.00 m

3.50 m

r=13.00 m

Ø=26.00 m

4.00 m

r=15.00 m

Ø=30.00 m

4.50 m

r=17.00 m

Ø=34.00 m

5.00 m

r=18.50 m

Ø=37.00 m

6.00 m

r=18.50 m

Ø=37.00 m

7.00 m

r=18.50 m

Ø=37.00 m

8.00 m

r=22.00 m

Ø=44.00 m

9.00 m

r=22.00 m

Ø=44.00 m

10.00 m

r=22.00 m

Ø=44.00 m

r=radius  /  Ø=diameter

15

sec

30

min

+

HA

ON HA

OFF

close

open

B.E.G.(UK)Ltd.

The Lightbox

111, Power Road, Chiswick

W4 5PY

Tel: 

0870.850 5412

Fax: 

0870.850 5413

E-Mail:  [email protected]

Internet:  www.beg-luxomat.com

B.E.G.BrückElectronicGmbH

Schlosserstr. 30

51789 Lindlar

Tel: 

02266.90 12 10

Fax: 

02266.45 092

E-Mail: 

[email protected]

Internet:  www.beg-luxomat.com

Reviews: