B.E.G. Luxomat BL4, Operating Manual

Page: 5 / 31

BL4, BL4-C
93288, 93284
Operating Manual 3
1 About this document
1.1 Other applicable documents
Short operating manuals:
￭ BL4: 50271_V1Short_MAN_BL4-DE 091118-1 (supplied with the device)
￭ BL4-C 50272_V1Short_MAN_BL4-K-DE 091118 (supplied with the device)
1.2 Used symbols and signal words
2 Safety
The motion detector BL4 was developed, manufactured and tested in accordance with the appli -
cable safety standards. It corresponds to the state of the art.
2.1 Intended use
The BL4 is a motion detector for ceiling mounting (interior applications) having a circular detection
area.
The BL4-C is a ceiling-mounted motion detector (for indoor applications) with a narrow, elongated
detection range especially for corridors.
Symbol indicating possible dangers to persons
Symbol indicating possible property damage
Symbol for useful information and tips
NOTICE Signal word for possible property damage
CAUTION Signal word for possible minor injuries
WARNING Signal word for possible serious injuries
DANGER Signal word for possible fatal injuries
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the device is oper -
ated in a manner not complying with its intended use.
➜ Only operate the device in accordance with its intended use.
➜ B.E.G. Brück Electronic GmbH is not liable for damages caused by improper use.
➜ Read these operating instructions before commissioning the device. Knowledge of the
operating instructions is an element of proper use.