B. Braun Infusomat fmS, Service Manual

Page: 34 / 86

Service Program
3
3 - 4 Infusomat® fmS 2.3 gb
Drug Name Function 110.0
Memory for maximum 10 drugs and 20 characters per name.
1. Display stored drug names with NEXT key.
2. Delete displayed entry with CLR.
3. Press YES to modify a drug name:
Move cursor to character with NEXT.
Select new character from line 3 with << or >>.
4. Repeat procedure for each character.
5. Return to initial function with END.
Ward Identification Function 120.0
Enter and display of a ward specific unit identification. Permanent
display if the unit is connected to mains and switched off.
1. Delete displayed entry with CLR. Press YES to enter modifica-
tions:
Move cursor to character with NEXT.
Select new character from line 3 with << or >>.
2. Repeat procedure for each character.
3. Return to initial function with END.
Serial Number Function 140.0
The displayed serial number must correspond with the number on
the unit type plate, as this number is used in interface mode.
1. YES activates the entry mode. Enter via the numeric key-
board.
2. YES stores the changed or new number.
3. Return to initial function with END.
DIANET Type Number Function 150.0
The displayed serial number must correspond with the number on
the unit type plate, as this number is used in the interface mode.
1. YES activates the entry mode. Enter via the numeric key-
board.
2. YES stores the changed or new number.
3. Return to initial function with END.
History Data Operating Hour Counter Function 200.0
1. OK activates the display.
2. Return to initial function with END.
Battery Operating Hours Function 210.0
1. OK activates the display.
Fig.: 3 - 4