B. Braun Infusomat fmS, Service Manual

Page: 33 / 86

Service Program
3
Infusomat® fmS 2.3 gb 3 - 3
Start / Quit the Service Program Activate the Service Program
1. Plug service connector on MFC socket at the rear of the unit.
- ** appears in the display.
2. Select ”Service Program” with the SM key. When the service
program is activated the red alarm LED flashes. The LED dis-
plays the code number of the selected group and function.
FUNCTION
END Jumps to the initial function
GR+ Selects group
FU+ Selects function in the
activated group
OK Activates the selected function or if
necessary skips to the sub-functions
with NEXT
Quit the Service Program
1. Press END in the main menu. - A data storage query is acti-
vated: ”Save changes? Yes / No”.
Y / N terminates the Service Program.
Press END to jump to the last function.
2. Switch off unit and remove service connector.
Note
Disconnect the unit from mains for at least 30 seconds after ter-
mination of the Service Program (memory is deleted). Then the
unit can be switched on again.
Unit Data Software Version Function 100.0
1. Select sub-functions with NEXT.
2. The current software version is displayed in the LCD-display:
- User program version with date
- Language with text version. Further languages with (+).
- Service Program version
- Service language with text version
3. Return to initial function with END.
Fig.: 3 - 2
Fig.: 3 - 3