B. Braun 871 5416, Service Manual

Page: 35 / 86

Service Program
3
Infusomat® fmS 2.3 gb 3 - 5
2. Return to initial function with END.
Pump Head Cycles Function 220.0
Display of the pump head cycles (delivered volume).
1. OK activates the display.
2. Return to initial function with END.
Operating Alarms Function 230.0
The last 20 operating alarms can be recalled.
They are displayed as 16 bit binary codes and each bit position can
be set from 0 to 1.
1. OK activates the alarm display.
2. Display operating alarms -01 to -20 with the (+) and (-) key.
3. Delete operating alarms with CLR.
4. Return to initial function with END.
Unit alarms will also be displayed from software version IFMe,
IFME on
Test Air Inline Sensor Function 300.0
After exchange check the function of the air inline sensor.
See TSI-List for permissible check values (see „Technical Safety
Check TSC“
➪
p. 7 - 1) .
1. Press OK. The received signal amplitude is displayed as a
measured value.
(The test value with NEXT is not important).
2. Insert an infusion line filled with air and check the maximum
permissible air value.
3. Insert an infusion line filled with fluid and check the mini-
mum permissible water value.
4. Return to initial function with END.
Fig.: 3 - 5
0 Battery empty (battery alarm)
1 Pump cover open
2 Drop alarm
3 Air alarm
4 Occlusion alarm
5 Expired standby time
6 CC alarm (interface)
7 KOR end alarm
8 to 14 free
15 Operating alarm
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Code 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Example for alarm ”Pump cover open”