B+B SmartWorx V3, Configuration Manual

Page: 89 / 112

4. CONFIGURATION
If the
Check TCP connection
item is ticked, check of the established TCP connection is
activated.
Item Description
Keepalive Time Time, after which it will carry out verification of the connection
Keepalive Interval Waiting time on answer
Keepalive Probes Number of tests
Table 65: USB PORT configuration 2
When item
Use CD as indicator of the TCP connection
selected, indication of the TCP
connection state using signal CD (DTR on the router) would be activated.
CD Description
Active TCP connection is on
Nonactive TCP connection is off
Table 66: CD signal description
When item Use DTR as control of TCP connection selected, control of the TCP connection
using signal CD (DTR on the router) would be activated.
DTR Description server Description client
Active The router allows a TCP connection Router starts TCP connection
Nonactive The router doesn’t allow a TCP conn. Router stops TCP connection
Table 67: DTR signal description
Supported USB/RS232 converters:
• FTDI
• Prolific PL2303
•
Silicon Laboratories CP210
×
The changes in settings will apply after pressing the Apply button
80