B+B SmartWorx V3, Configuration Manual

Page: 80 / 112

4. CONFIGURATION
Choosing
Enable AT-SMS protocol on expansion port 1
and
Baudrate
it is possible to
send/receive an SMS on the serial Port 1.
Item Description
Baudrate Communication speed on expansion port 1
Table 56: Send SMS on serial PORT1 configuration
Choosing Enable AT-SMS protocol on expansion port 2 and Baudrate it is possible to
send/receive an SMS on the serial Port 2.
Item Description
Baudrate Communication speed on expansion port 2
Table 57: Send SMS on serial PORT2 configuration
Choosing Enable AT-SMS protocol on TCP port and enter the TCP port it is possible to
send/receive an SMS on the TCP port. SMS messages are sent with the help of standard AT
commands.
Item Description
TCP Port TCP port the sending/receiving SMS messages will be allowed on.
Table 58: Send SMS on ethernet PORT1 configuration
4.18.1 Sending SMS
After establishing connection with the router via serial interface or Ethernet, it is possible
to use AT commands for work with SMS messages.
The following table lists the commands that are supported by Conel routers. For other AT
commands
OK
response is always sent. There is no support for complex AT commands, in
such a case ERROR response is sent by router.
AT Command Description
AT+CGMI Returns the manufacturer specific identity
AT+CGMM Returns the manufacturer specific model identity
AT+CGMR Returns the manufacturer specific model revision identity
AT+CGPADDR Displays the IP address of the ppp0 interface
AT+CGSN Returns the product serial number
AT+CIMI Returns the International Mobile Subscriber Identity number (IMSI)
AT+CMGD Deletes a message from the location
Continued on next page
71