B+B SmartWorx V3, Configuration Manual

Page: 78 / 112

4. CONFIGURATION
This command sends e-mail to address
name@domain.com
with the subject
"subject"
,
body message "message" and attachment "abc.doc" right from the directory c:
\
directory
\
and attempts to send 5 times.
4.18 SMS Configuration
SMS configuration can be invoked by SMS item in the Configuration section. Sending
of SMS can be defined in various events and states of the router. Sending od SMS can be
configured in the first part of the window:
Item Description
Send SMS on power up Automatic sending of SMS messages after power up.
Send SMS on connect to mobile
network Automatic sending SMS message after connection to
mobile network.
Send SMS on disconnect to mo-
bile network Automatic sending SMS message after disconnection
to mobile network.
Send SMS when datalimit
exceeded Automatic sending SMS message after datalimit ex-
ceeded.
Send SMS when binary input on
I/O port (BIN0) is active Automatic sending SMS message after binary input
on I/O port (BIN0) is active. Text of message is in-
tended parameter BIN0.
Add timestamp to SMS Adds time stamp to sent SMS messages. This stamp
has a fixed format YYYY-MM-DD hh:mm:ss.
Phone Number 1 Telephone numbers for sending automatically gener-
ated SMS.
Phone Number 2 Telephone numbers for sending automatically gener-
ated SMS.
Phone Number 3 Telephone numbers for sending automatically gener-
ated SMS.
Unit ID The name of the router that will be sent in an SMS.
BIN0 – SMS SMS text messages when activate the first binary in-
put on the router.
Table 53: Send SMS configuration
In the second part of the window it is possible to set function Enable remote control via
SMS . After enabling it is possible to control the router by SMS message.
69