B+B SmartWorx V3, Configuration Manual

Page: 75 / 112

4. CONFIGURATION
Item Description
IP Address IP address
Period Period of sending statistical information (in minutes)
Table 50: SNMP configuration (R-SeeNet)
Every monitor value is uniquely identified by the help of number identifier OID – Object
Identifier . For binary input and output the following range of OID is used:
OID Description
.1.3.6.1.4.1.30140.2.3.1.0 Binary input BIN0 (values 0,1)
.1.3.6.1.4.1.30140.2.3.2.0 Binary output OUT0 (values 0,1)
.1.3.6.1.4.1.30140.2.3.3.0 Binary input BIN1 (values 0,1)
Table 51: Object identifier for binary input and output
All SPECTRE v3 routers also provide information about internal temperature of the device
(OID 1.3.6.1.4.1.30140.3.3) and power voltage (OID 1.3.6.1.4.1.30140.3.4).
It is important to set the IP address of the SNMP agent (router) in field Remote SNMP
agent . After enter the IP address is in a MIB tree part is possible show object identifier.
The path to objects is:
iso
→
org
→
dod
→
internet
→
private
→
enterprises
→
conel
→
protocols
The path to information about router is:
iso
→
org
→
dod
→
internet
→
mgmt
→
mib-2
→
system
The list of available and supported OIDs and other details can be found in the application
note SNMP Object Identifier [8].
66