manualshive.com logo in svg

B+B SmartWorx SE400 Series, User Manual

Share
Download
B+B SmartWorx SE400 Series User Manual Download Page 89

76

SE400 SERIES

QoS Settings

Once the QoS function is enabled, you can configure the available settings.

To access this page, click 

QoS

 > 

General

 > 

QoS Settings

.

Figure 90: QoS > General > QoS Settings

The following table describes the items in the previous figure.

The ensuing table for 

QoS Status

 settings are informational only: Port, CoS value, Remark

CoS, Remark DSCP and Remark IP Precedence.

Table 72: QoS > General > QoS Settings

Item

Description

Port

Enter the port number to associate with the QoS setting.

CoS Value

Click the drop-down menu to designate the Class of Service (CoS) value (0 
to 7) for the Port entry.

Remark CoS

Click 

Disabled 

or 

Enabled

 to  set up the Remark CoS function. When 

enabled the LAN (preassigned priority values) is marked at Layer 2 bound-
ary to CoS values.

Remark DSCP

Click 

Disabled 

or 

Enabled

 to  set up the DSCP remark option for the QoS 

function.

Remark IP Precedence

Click 

Disabled 

or 

Enabled

 to  set up the Remark IP Precedence for the QoS 

function.

Apply

Click 

Apply

 to save the values and update the screen.

Summary of Contents for SE400 Series





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands