32
SE400 SERIES
The Logging Message Filter page allows you to enable the display of logging message filter.
To access this page, click
Monitoring
>
Logging Message
.
Figure 34: Monitoring > Logging Message
The following table describes the items in the previous figure.
The ensuing table for
Logging Information
table settings are informational only: Target,
Severity and Category.
The ensuing table for
Logging Message
table settings are informational only: No., Time
Stamp, Category, Severity and Message.
System Object ID
Displays the base object ID of the switch.
System Up Time
Displays the time since the last switch reboot.
Logging Message
Table 17: Monitoring > Logging Message
Item
Description
Target
Click the drop-down menu to select a target to store the log messages.
Buffered: Store log messages in RAM. All log messages are
cleared after system reboot.
File: Store log messages in a file.
Severity
The setting allows you to designate a severity level for the Logging Message
Filter function.
Click the drop-down menu to select the severity level target setting.
The level options are:
emerg: Indicates system is unusable. It is the highest level of severity.
alert: Indicates action must be taken immediately.
crit: Indicates critical conditions.
error: Indicates error conditions.
warning: Indicates warning conditions.
notice: Indicates normal but significant conditions.
info: Indicates informational messages.
debug: Indicates debug-level messages.
Category
Click the drop-down menu to select the category level target setting.
View
Click
View
to display all Logging Information and Logging Message informa-
tion.
Refresh
Click
Refresh
to update the screen.
Clear buffered mes-
sages
Click
Clear buffered messages
to clear the logging buffer history list.
Table 16: Monitoring > Device Information (Continued)
Item
Description
