2. ACCESS TO THE WEB CONF.
2. Access to the Web Configuration
Attention!
Wireless transmissions only functions when you activate the SIM card for
data traffic and insert it into the router. Remove the power source before inserting the
SIM card.
You may use the web interface to monitor, configure and manage the router. To do so,
enter the router’s IP address in your browser. The default address is 192.168.1.1. Only ac-
cess via secured
protocol is permitted. So the syntax for the IP address must be
https://192.168.1.1. When accessing the router for the first time you will need to install a se-
curity certificate if you don’t want the browser to show you a domain disagreement message.
To avoid receiving domain disagreement messages, follow the procedure described in the
following subchapter.
The default username is "root". The default password is "root".
Figure 1: Example of the Web Configuration
3
Summary of Contents for SPECTRE V3
